BHD
JOD
KWD
LBP
OMR
QAR
SAR
USD
Boya Wm3D 2.4GHz Wireless Microphone For Ios Devices
The BOYA BY-WM3D 2.4GHz wireless microphone system features one transmitter and one receiver, both of them are compact and lightweight.
Features:
- 2.4GHz Transmission technology.
- Compatible with iPhone, iPad, iPod, DSLRs, PC, camcorders, recorders etc.
- Ideal for daily vlogs, live streaming and interview, recording etc.
- Extremely compact receiver and transmitter.
- Including charging case for charging and pairing.
- Three interchangeable connectors for receiver.
- Built-in omnidirectional microphone.
- Easy set-up and plug-and-play.
- One full charge supports the TX/RX for about 4.5/8 hours use.
Recommended Products
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
- Transmission Type: 2.4GHz
- Polar Pattern: Omnidirectional
- Frequency Response: 20Hz-20KHz (±3dB)
- Distortion: ＜0.1%
- Sampling Rates: 48kHz
- Bit Depth: 16Bit
- Signal-to noise ratio: 75db or more
- Sensitivity: -42dB±3dB (1dB=1V/Pa@1kHz)
- Operating Distance: 20m(without obstacle)
- Power Consumption: TX: 80mW RX: 60mW
- Working Time:
- TX: 4.5 hours * two times
- RX: 8 hours * two times
- Charing Time:
- TX:2 hours
- RX:2 hours
- Charging Case:2 hours
- Charging Port(Charging Case): Type-C
- Battery Capacity:
- TX:100mA
- RX:100mA
- Charging Case:1000mA
- Size: Charging Case:120*77*30.5m(4.7*3*1.2")
- TX:51.8*15.6*18mm(2*0.6*0.7")
- RX:54*15.6*15.6mm(2*0.6*0.6")
- Weight:
- TX+RX+Charging Case: 129g (4.5 oz)
- TX：10.5g (0. 37 oz) RX：9.5g (0. 33 oz)
- Warranty: 1 year
What Is In The Box
- Charging Case
- Clip-on Minature Transmitter
- Professional Compact Receiver
- MFI Certified Lightning Adapter
- 3.5mm TRS Adapter
- 3.5mm TRRS Adapter
- Foam Windshield
- Fur windscreen
- 30cm/11.8"Type-C to USB-A Charging Cable
Videos
Manufacture Description
Ultra-compact Wireless Microphone System
Small size & light weight, the transmitter is only 10.5g (0.37oz). And the BY-WM3D is equipped with a charging case that can charge and pair the transmitter and receiver. After one full charge, the TX/RX can continue working for about 4.5/8 hours.
Three Interchangeable Connectors Make It Universal
And just like the BY-WM3U, the receiver of BY-WM3D also features three interchangeable connectors, two of which are the same as the ones of BY-WM3U, namely TRS and TRRS connector. But its last connector is Apple MFI certified Lightning connector. These three plugs make it compatible with all recording devices with Lightning or 3.5mm input socket.
In-built Microphone to Avoid Hassle
With an in-built omnidirectional microphone on the transmitter, it is easy to use. After pairing, just connect the receiver with your recording device, pin the transmitter on your collar to get started.