BHD
JOD
KWD
LBP
OMR
SAR
USD
AED
iFi Audio ZEN Phono 3 MC/MM Phono Stage with Intelligent Subsonic Filter
In a world where modern technology is ever-evolving, simplicity and connection are what we crave most. Nothing demonstrates this quite like the familiar act of picking your favourite LP, hearing the soft crackle before it starts, and sharing a story or two with friends as you listen together.
Features:
- Supports four MC/MM gain selections from 36dB to 72dB and four input impedance settings, ensuring compatibility with a wide range of cartridges
- Features an intelligent subsonic filter to effectively remove only the ultra-low frequencies caused by warps, not by the music, unlike typical bass-reducing filters
- With an EIN (Equivalent Input Noise) of -151dBV, this phono stage surpasses some Class A+ models by 20dBV,ensuring a super-silent noise oor
- Precise RIAA with balanced output, performance matches that of a $1,000 phono stage
- Internal high-tech 1.2MHz clean power supply, rivalling classic tube amplifiers' LC filtering circuits
المنتجات المقترحة
التوصيل خلال 3-5 يوم عمل
فيزا وماستر كارد
منتجات شاهدها عملاء آخرون
معاينة موقع سماعة تك
تفاصيل المُنتج
- Gain Settings
- MM: 36dB
- MC High: 48dB
- MC Low: 60dB
- MC V-Low: 72dB
- Max Output Voltage (RMS):
- Bal:
- 100kΩ: ≥19.98V (THD+N <1%)
- 600Ω: ≥12.75V (THD+N <1%)
- SE:
- 100kΩ: ≥10.07V (THD+N <1%)
- 600Ω: 7.94V (THD+N <1%)
- Bal:
- Output Impedance:
- BAL: 200Ω
- SE: 100Ω
- Input Impedance
- MM: 47KΩ (100/200pF)
- MC High: 47kΩ (100/200pF)
- MC Low: 1k/400/100Ω
- MC V-Low: 1k/400/100Ω
- SNR:
- MM: 91dB(A)/82dB (unweighted 80kHz BW)
- (2V Balanced, 1V Single-Ended) MC High 81dB(A)/72dB (unweighted 80kHz BW)
- MC Low: 89.6dB(A)/80dB (unweighted 80kHz BW)
- MC V-Low: 78.6dB(A)/69dB (unweighted 80kHz BW)
- Harmonic Distortion:
- MM: <-91dB/0.0027%
- (2V Balanced, 1V Single-Ended @ 600Ω) MC High <-80dB/0.0095%
- MC Low: <-70dB/0.031%
- MC V-Low: <-73dB/0.022%
- Channel Separation: >75dB (1kHz all modes)
- Frequency Response:
- BAL: 20Hz-80kHz (-3dB)
- SE: 20Hz-20kHz (-0.15dB)
- Dimensions (Length x Width x Height): 158 x 115 x 35mm (6.2” x 4.6” x 1.4”)
- Net Weight: 456g
- Power Supply Requirement: DC 5V/0.5A (centre positive)
- Power Consumption: No Signal ~1.5W; Max Signal ~1.8W
- Warranty: 1 year
ماذا في العلبة
- iFi Audio ZEN Phono 3 MC/MM Phono Stage with Intelligent Subsonic Filter
- RCA Cable
- Power Adapter
- Quick Start Guide
- Instruction Card
الفيديوهات
مواصفات المُصنع
iFi Audio ZEN Phono 3 MC/MM Phono Stage with Intelligent Subsonic Filter
English Q&A
What makes the iFi Audio ZEN Phono 3 a great upgrade for vinyl lovers?
The ZEN Phono 3 delivers ultra-clean amplification with extremely low noise, supporting both MC and MM cartridges. It enhances clarity, detail, and musical texture, revealing the full character of your vinyl recordings. Its refined circuitry ensures a natural and warm listening experience true to the original pressings.
What is the benefit of the Intelligent Subsonic Filter?
The intelligent filter automatically removes unwanted low-frequency rumble caused by warped or older records, without altering the audible range. This helps protect speakers, reduces distortion, and preserves the integrity of the music while maintaining accurate bass response.
Is it suitable for home audio setups?
Yes, the compact and stylish design integrates easily into any home audio system. With versatile outputs and strong compatibility with amplifiers and speakers, the ZEN Phono 3 provides an instant improvement to vinyl playback with a simple, plug-and-play approach.
Available now at Samma3a.com with fast shipping and official warranty.
Looking to elevate your vinyl setup? The iFi Audio ZEN Phono 3 offers clean MC/MM amplification, an intelligent subsonic filter, and a natural sound signature perfect for discerning listeners. Available now at Samma3a.com with fast shipping and official warranty.
Keywords: iFi Audio ZEN Phono 3, phono stage, MC/MM preamp, subsonic filter, vinyl audio upgrade.