BHD
JOD
KWD
LBP
OMR
QAR
SAR
USD
iFi Audio NEO iDSD 2 Lossless Bluetooth DAC/Amp
The NEO iDSD 2 is iFi Audio's versatile new 3-in-1 DAC/Amp, designed specifically for CAS audiophiles. It pairs effortlessly with your headphones as a Head-Fi DAC/Amp, can be used as a pure DAC with your integrated amplifier, or serve as a DAC/Preamp for your active speakers and power amplifier.
المنتجات المقترحة
التوصيل خلال ١-٢ يوم عمل
فيزا وماستر كارد
خدمة الدفع عند الاستلام متوفرة
منتجات شاهدها عملاء آخرون
معاينة موقع سماعة تك
تفاصيل المُنتج
Inputs:
- Digital:
- USB3.0 B (USB2.0 compatible); S/PDIF (coaxial/optical)
- Bluetooth 5.4 (aptX Lossless, aptX Adaptive, aptx, LDAC, HWA/LHDC, AAC and SBC)
- Analogue: UnBAL 3.5mm
- Clock: External Sync Clock 10MHz, 1Vpp nominal, 75Ω. Sinewave or Squarewave
- Format: PCM 768kHz; DSD 512 (22.6MHz); MQA Full Decoder
Line Section:
- Output:
- Balanced XLR: 19.5V max. (variable) 4.4V fixed
- UnBAL RCA: 10.5V max. (variable) 2.2V fixed
- Output Impedance: XLR ≤100Ω; RCA ≤50Ω
- SNR: <-120dB(A) @ 0dBFS
- DNR: >120dB(A) @ -60dBFS
- THD+N: <0.0015% @ 0dBFS
Headphone Section
- Output:
- Balanced 4.4mm: 3.5V / 19.5V max. (12Ω - 600Ω Headphone)
- UnBAL 6.3mm: 4.5V / 9.50V max. (12Ω - 300Ω Headphone)
- Output Power:
- Balanced: >19.5V/650 mW (@ 600Ω); >13.3V/5,551 mW (@ 32Ω)
- UnBAL: >10.5V/184 mW (@ 600Ω); >9.5V/2,832 mW (@ 32Ω)
- Output Impedance: <1Ω
- SNR: >120dB(A) (3.3V 6.3mm/6.2V 4.4mm)
- DNR: -120dB(A)
- THD + N: <0.0015% (125mW @ 32Ω)
- Power supply requirement: DC 9V/1.5A - 15V/0.9A (centre +ve)*
- Power consumption: No Signal ~5W; Max Signal ~13.5W
- Dimensions: 214 x 158 x 41 mm (8.4" x 6.2" x 1.6")
- Net weight: 916g (2.0 Ibs)
Warranty: 1 year
ماذا في العلبة
- iFi Audio NEO iDSD 2 Lossless Bluetooth DAC/Amp
- Power Cable
- Remote Control
- Stand
- User Manual
- Warranty Card
الفيديوهات
مواصفات المُصنع
My Blue isn’t your blue. It’s new and Lossless.
The NEO iDSD 2 features the latest Bluetooth 5.4 technology, supporting the new aptX Lossless codec, which provides a maximum bitrate of 1,200kbps. In comparison, aptX Adaptive has a maximum bitrate of 420kbps, while LDAC offers a higher bitrate of 990kbps.
However, aptX Lossless is the first and only Bluetooth codec capable of streaming CD-quality audio without using a compression method that degrades sound quality. While other Bluetooth codecs claim to support CD-quality and even hi-res audio, they employ lossy compression during transmission, which negatively affects sound quality.
The NEO iDSD 2 used Qualcomm’s new QCC518x Bluetooth audio chip, is qualified to Bluetooth 5.4, supported all* Bluetooth formats including: aptX Lossless, aptX Adaptive, aptX, LDAC, LHDC/HWA, AAC and SBC.
Stand by you. No matter up or down.
Whether you’re using the NEO iDSD 2 as a Desk-Fi or Hi-Fi, you can position it horizontally or vertically. The new 2-inch colour display automatically rotates to suit the orientation.
When using it as a Desk-Fi, you can position it vertically on your desk to save space. Set it to variable output, and with its powerful 19.5V maximum balanced output, it works well with your active speakers with volume control. The volume control is analogue, which is superior to any digital volume control.
When using the NEO iDSD 2 as a Hi-Fi, you can place it horizontally. It can serve as a pure DAC, playing all Hi-Res music files from PCM 32-bit/768kHz to DSD512 and full MQA decoding. You can also connect it directly to your power amplifier as a preamplifier, utilising its analogue volume control.
More than new features. Enhanced circuitry.
The NEO iDSD 2’s enhanced PureWave circuit design, with its balanced dual-mono topology and short signal paths, is known for outstanding linearity and minimal noise and distortion, offering you exceptional sonic purity.
The results are an improved Signal-to-Noise Ratio (SNR) of >120dB(A), Dynamic Range (DNR) of -120dB(A), and Total Harmonic Distortion plus Noise (THD+N) of <0.0015%, bringing the NEO iDSD 2’s performance on par with DACs at a higher price point.