BHD
JOD
KWD
LBP
OMR
QAR
SAR
USD
PreSonus Temblor T8 8" Powered Studio Subwoofer
PreSonus Temblor T8 Active 8" Studio Subwoofer complements any full-range monitoring system, and is suitable for use in a variety of applications such as music production, gaming, and home theater, and more. The Temblor T8 features an 8", down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4" TRS and RCA main inputs, and 1/4" TRS and RCA pass-through outputs to connect the top speakers.
- 8" Composite Woofer
- 200W Class AB Amplifier
- 50 to 130 Hz Continuously Variable LPF
- Polarity Invert Switch
- Input Gain
- TRS and RCA Pass-Through Outputs
- 30 to 200 Hz Frequency Response
المنتجات المقترحة
فيزا وماستر كارد
منتجات شاهدها عملاء آخرون
معاينة موقع سماعة تك
تفاصيل المُنتج
- Type: Studio Subwoofer
- Powered: Yes
- Speaker Size: 8"
- Driver Type: Glass Composite cone
- Driver Power Amp: 100W RMS/200W Peak
- Total Power : 200W
- Frequency Range: 30Hz-200Hz
- Maximum Peak SPL: 104dB SPL @ 1m
- Input Types: 2 x 1/4", 1 x Dual RCA Stereo
- Output Types: 2 x 1/4", 1 x Dual RCA Stereo
- Height: 11"
- Width: 10.2"
- Depth: 12.6"
- Weight: 21.2 lbs.
- Warranty: 1 year
ماذا في العلبة
- PreSonus Temblor T8 Active 8" Studio Subwoofer
- Power Cord
الفيديوهات
مواصفات المُصنع
PreSonus Temblor T8
A solid foundation for mixing.
A subwoofer provides the extra-deep low frequencies you need when mixing on relatively small monitors, especially for music that requires serious low-end punch. Powerful and musical, Temblor® T8 active, downward-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end so that you can produce your best mix from top to bottom.
Tight, clean, responsive bass.
The Temblor T8’s glass-composite low-frequency driver delivers tight and responsive bass, thanks to its lightweight and rigid cone. This design also provides lower distortion than other materials, ensuring that the sub-bass reproduction in your monitoring system is as coherent and clear as your full-range monitors.
A perfect fit with your full-range monitors.
Temblor-series subwoofers make integrating a subwoofer into your monitoring setup easy so you can create the most accurate possible response. The Temblor T8 provides a continuously variable lowpass filter (50 Hz to 130 Hz), allowing you to create a seamless crossover transition between your full-range studio monitors and subwoofer for the most accurate listening environment possible.
The central hub of your monitoring setup.
Temblor subwoofers provide the connections and controls necessary to act as the central hub for a basic monitoring setup. A switchable highpass filter on the full-range outputs helps to avoid frequency cancellation and reinforcement in the subwoofer’s upper range. A polarity invert ensures your system is in phase.
Accuracy defined.
When you hear the low-frequency foundation of your mix accurately, you can make more informed decisions and create more translatable mixes. Temblor T8 subwoofers are the natural sub-bass extension for virtually any small full-range studio monitoring system, home stereo, or home theater system. Hear the Temblor T8 at your favorite PreSonus® dealer.
A carefully tweaked, inexpensive subwoofer like the PreSonus Temblor T8 can change your little world.
Andy Hong and Scott McChane, Tape Op