BHD
JOD
KWD
LBP
OMR
QAR
USD
AED
Onkyo TX-NR696 7.2-Channel Network A/V Receiver Black
The TX-NR696 is a harmonious mix of tech and tradition that adapts to entertainment life in every source, from 3D film-scores to vinyl records. It is equipped with Chromecast, works with Sonos, AirPlay 2 and DTS Play-Fi with streaming services for smooth multi-room audio evolved by the support of the new high-speed 802.11ac (2x2 MIMO) Wi-Fi. Dolby Atmos and DTS:X provide audiences with immersive experience in movies and games, THX Certified assures a cinema-reference experience. If 5.2.2-ch setup is not possible, Dolby Atmos Height Virtualizer and DTS Virtual:X creates a 3D sound-field from horizontal speaker layouts. Zone 2 outputs bring amped multi-source audio to two rooms.
- 4k/60p/HDR
- 175 W/Ch THX Certified Select DAA System
- Onkyo Controller app for easy multi-room management
- Chromecast bult-in with Google Assistant
- DTS Play-Fi, Wi-Fi, AirPlay 2, Spotify, Bluetooth
- FlareConnect wireless multi-room audio
- Quad-core SoC supports 802.11ac
المنتجات المقترحة
التوصيل خلال 3-5 يوم عمل
فيزا وماستر كارد
منتجات شاهدها عملاء آخرون
معاينة موقع سماعة تك
تفاصيل المُنتج
Amplifier Section
Power output
- All channels 175 W/Ch (6 Ω, 1 kHz, 10% THD, 1-ch driven)
- 165 W/Ch (6 Ω, 1 kHz, 1% THD, 1-ch driven, IEC)
- Dynamic power 240 W (3 Ω, Front)
- 210 W (4 Ω, Front)
- 120 W (8 Ω, Front)
- THD+N (Total Harmonic Distortion + Noise) 0.08% (20 Hz–20 kHz, half power)
Input sensitivity and impedance
- 200 mV rms/47 kΩ (Line)
- 3.5 mV rms/47 kΩ (Phono MM)
Rated RCA output level and impedance
- 1 V rms/470 Ω (Subwoofer pre-out)
- 200 mV rms/2.3 kΩ (Zone B/Zone 2 line-out)
Frequency response
- 10 Hz–100 kHz/+1 dB, -3 dB (Direct Mode)
Tone control
- ±10 dB, 20 Hz (Bass)
- ±10 dB, 20 kHz (Treble)
Signal-to-noise ratio
- 106 dB (Line, IHF-A)
- 80 dB (Phono, IHF-A)
Speaker impedance - 4 Ω–16 Ω
Tuner Section
Tuning frequency range
- FM 87.5 MHz–108 MHz
- AM 522 kHz–1,611 kHz
- 530 kHz–1,710 kHz
General
- Power supply AC 220–240 V~, 50/60 Hz
- No-sound power consumption 65 W
- Standby power consumption 0.15 W
ماذا في العلبة
- Indoor FM antenna
- AM loop antenna
- Speaker setup microphone
- Quick start guide
- Remote controller
- AAA batteries x2
الفيديوهات
مواصفات المُصنع
-
Works with Sonos
With Sonos Connect, the awesome home theater you’ve built around your Onkyo receiver can now be part of your existing Sonos Home Sound System, or the start of a new one. Instantly upgrade the music streaming capability of your home theater with Sonos Connect and a free firmware update. After a simple set up, your Onkyo A/V receiver will seamlessly tie into Sonos, instantly waking, changing inputs and playing at the volume you command through the familiar Sonos app.THX® Certified Select™ Reference Sound
THX Certified Select guarantees the high-volume sound experienced at a commercial theater in your home. To gain certification, amplifiers must pass severe THX bench-tests covering every aspect of audio performance. THX Certified Select components suit rooms where screen-to-seat viewing distance is about 10 feet and room volume around 2,000 cubic feet.
Dolby Atmos® and DTS:X™ with upmixing solutions
Object-based audio lets sounds play independently through any speaker, moving all around your audience so they feel 5.2.2-ch Dolby Atmos or DTS:X soundtracks with natural conviction. DTS Neural:X® and Dolby Surround upmixing solutions find spatial cues in legacy multichannel soundtracks and upmix them for 3D audio playback through your object-audio-ready speaker system. Both solutions offer cross-compatible support for common movie soundtracks, such as Dolby® Digital 5.1, Dolby® TrueHD, and DTS-HD Master Audio™, so you can enjoy more immersive 3D sound from your movie library as well as with supported video streaming services.