BHD
JOD
LBP
OMR
QAR
SAR
USD
AED
iFi Audio Pro iCAN Signature Headphone and Stereo Amplifier
The Pro iCAN Signature is our new upgraded edition of the original Pro iCAN. The Signature edition builds on the strengths of the Pro iCAN and features even more ultra-grade audiophile components designed to take your listening to a higher plane than ever before. It is a top-of-the-line headphone amplifier that is capable of driving anything and everything from the most sensitive custom iEMs to the AKG K-1000, the most difficult to drive headphone ever made.
Features:
- Power like no other. Super-powerful 14,000mW headphone output power.
- Gain is adjustable from 0dB/9dB/18dB. It can output more than 10V in Single-Ended mode and 20V in Balanced-mode. The 20V mode is equivalent 100W into a 40 Ohm speaker.
- An ‘Out of Head’ listening experience. Our 3D Holographic® dual-analogue matrices place the artist with you in the room, not inside your head.
- Sonically superior – richer, deeper. The XBass® analogue bass correction system corrects for the missing headphone/speaker bass response.
Recommended Products
Delivered within 3-5 working days
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
- Gain (user-selectable): 0dB, 9dB and 18dB
- Frequency Response: 0.5Hz to 500kHz(-3dB)
- THD & N Balanced:
- Solid-State: 0.0015%
- Tube: 0.002%
- Tube+: 0.012%
- THD & N Single- Ended:
- Solid-State: 0.005%
- Tube: 0.005%
- Tube+: 0.2%
- SNR: >147dB(A)
- Balanced:
- Single-Ended: > 137dB(A)
- Output Power:
- Balanced: >14,000mW (@ 16)
- Single-Ended: >4,800mW (@ 16)
- Output Voltage:
- Balanced: >23V (@ 600)
- Single-Ended: >11.5v (@ 600)
- Input voltage (Pro iDSD Signature): DC 9V/6.7A – 18V/3.35A
- Input voltage (iPower Elite): AC 85 – 265V, 50/60Hz
- Power consumption: < 22W idle, 50W max
- Dimensions: 213 x 193 x 63 mm / 6.2" x 3.9" x 1.4"
- Net weight: 1.93 kg / 4.3 Ibs
- Warranty: 1 year
What Is In The Box
- iFi Audio Pro iCAN Signature Headphone and Stereo Amplifier
- RCA Cable
- User Manual
- iPower Elite
- Infrared Remote Control
- General Accessory Instruction Card
Videos
Manufacture Description
Beautifully balanced Pro power
The Pro iCAN Signature sports an end-to-end fully differential balanced circuit design that delivers ultra low distortion. This means extraordinary quality with minimal interference and reduced crosstalk. The sound is cleaner, deeper and more dynamic.
It is also exceptionally powerful and will drive any headphone on the planet. It boasts balanced output power of >14,000mW and single-ended power output of >4,800mW.
And with variable gain, you can adjust the Pro iCAN
Amp it up to ultra
Enhancements to the Pro iCAN Signature include:
Revised circuit design incorporates even more ultra-grade audiophile components Upgraded power supply circuits to eradicate even more noise and distortion Top of the range iPower Elite offboard AC/DC power supply included Hand-selected and matched tubes in the output stage 4.4mm Pentaconn balanced-headphone output New aluminium remote control
To tube or not to tube…?
Or to Tube+? That is the question.
With the Pro iCAN Signature you can enjoy the sound of solid-state or tubes in one single package.
For some of your recordings, and depending on whether you are listening through headphones or speakers, you may prefer the ‘lively’ feel of solid-state or for others, the more ‘luxurious’ feel of Tube or Tube+.
The choice is yours at the flick of a switch in real time.
Get connected
The Pro iCAN Signature boasts a plethora of fully balanced and single-ended connections.
Headphone connections include the new 4.4mm balanced Pentaconn output as well as a fully balanced XLR, a single-ended 6.3mm and our unique S-Balanced 3.5mm output.
Our S-Balanced output cuts distortion by 50% with single-ended headphones connections.