BHD
JOD
LBP
OMR
QAR
SAR
USD
AED
Monitor Audio Gold W12 12-Inch Subwoofer - Black
KWD1,120.64
All of the rumble and wallop of Hollywood’s most action-packed blockbusters is yours from the potent Gold W12 Subwoofer, in which a 12" (305 mm) long-throw driver is reinforced by a pair of Auxiliary Bass Radiators (ABR) and powered by 600 W of Class D amplification. The power and scale this combination are capable of generating can be felt just as easily as it can be heard, thanks to its prodigious 20 Hz bass extension.
Features:
- Three driver subwoofer system featuring two 200 mm ABR’s (Auxiliary Bass Radiators)
- Punchy bass below 20 Hz
- Ultra-long throw 12" driver featuring:
- Dished C-CAM cone
- Black pole and motor plates for effective heat radiation
- Larger 75 mm diameter voice coil – black anodised to radiate more heat away
- Triple suspension for ultimate linearity – ensuring control at high power and excursions
- Powerful 600 Watt Hypex Class-D Amplifier module, with switching power supply – provides instantaneous deliveryof high current when required
- DSP processing with all control features and crossover performed digitally
- APC (Automatic Position Correction) – in-house developed automatic room set-up feature using microphone for simple system optimization
- Top mounted control panel
- USB for connection to ‘SubConnect’ application, firmware updates and service
Recommended Products
Delivered within 3-5 working days
Prepaid Product
Suggested Addons
Customer Also Viewed
Sale
Best Seller
Sale
Best Seller
FiiO K3s Pocket-sized Headphone Amplifier and USB-C DAC
Add to Compare
was
KWD43.59
Special Price
KWD37.00
Out of stock
FiiO OLYMPUS 2 E10K Desktop USB-C AMP DAC Convertor
Add to Compare
was
KWD27.11
Special Price
KWD23.81
Out of stock
Bundle: beyerdynamic DT 990 Pro Studio Headphones 250 Ohms With FiiO K3s Pocket-sized Headphone Amplifier
Add to Compare
was
KWD98.80
Special Price
KWD84.46
Out of stock
Sony WH-1000XM4 Wireless Noise-Canceling Over-Ear Headphones - Black
was
KWD123.52
Special Price
KWD98.80
Samma3a Review
Not Available
Technical Specification
- System Format: Long-throw 12" driver featuring ‘dished’ C-CAM cone. Dual 200 mm ABR (auxiliary bass radiator). Front baffle 36 mm, cabinet 25 mm MDF construction with internal bracing and sealed amplifier compartment
- Lower Frequency Limit: -3 dB @ 25 Hz / -10 dB @ 20 Hz (Free Field). Music preset (Default): -3 dB @ 19 Hz / -10 dB @ 16 Hz (In Room). Assignable Low Frequency Limit Protection Filter: -3 dB @ 12 Hz
- Upper Frequency Limit: -3 dB @ 150 Hz
- Drive Unit Complement: 1 x 12" C-CAM subwoofer driver featuring triple suspension and 3" long throw voice coil
- Linear Driver Excursion: 19 mm Peak to Peak, Total displacement 1.6 Litres
- Amplifier Output: 600 W
- Amplifier Classification: Class D with high current Switch mode power supply (SMPSU)
- DSP: 50 MIPS DSP Core giving 512 instructions per sample, 138 dB of dynamic range and 56-bit double precision processing, dynamically updated by an up to 50 MHz MCU
- Digital Conversion: 24 bit/up to 48 kHz ADCs & DACs built into ADAU1701 DSP Core
- LED UI Control Panel: Adjustable brightness 0% - 100%, configurable auto off feature. Quick access to menu items: Trim & Mute, LPF, Phase, Preset Select
- Global Settings (via SubConnect): Display Brightness (0-100%), Dim (to 10% or to Off), Default Preset, Mute Link Outputs, 12 V Trigger Assignment (Power On / Off or Preset select), Input gain (Master -80 to +20 dB, Trim -11 to +11 dB, Mute), Phase (0 – 360 in 15-degree steps), Night Mode Threshold (0 dB to -36 dB), Auto On / Off (Enable Signal Sense, Always On, Time to off 5 – 240 mins)
- User Presets (via SubConnect): 4 fully configurable user Presets including, Preset Name, LPF Frequency (5 Hz Steps from 20 – 135 Hz), LPF Slope Order (-12 or -24 dB/Oct), Input (Stereo, LFE or Both), Trim Offset (-6 to +6 dB), EQ mode (Impact, Music, Movie or Default), User EQ (6 adjustable filters applied on top of EQ mode), Room EQ (On / Off), Night Mode (On / Off)
- User Equalisation (via SubConnect): 6 fully controllable EQ filters and 4 default filters with gain offset per preset, Voreinstellungen: Flat / Music / Movie / Impact
- Room Correction EQ: 6 System controlled parametric EQ filters set using advanced detection algorithm. Measurement can be initiated from the control panel or the SubConnect with up to microphone 6 positions (default 2)
- Night Mode: Night mode, assignable (On or Off) per Preset with global threshold (0 dB to -36 dB). Introduces dynamic range reduction lowering the level of loud sections
- Phase Control: 0 – 360 degrees Increments of 15 degrees with a pure invert at 180 degrees
- Low Pass Filter Alignment: 2nd or 4th order (12 or 24 dB/Octave), Increments of 5 Hz from 35 Hz to 135 Hz
- Auto Sensing Input Requirements: Line Level >1mV on unbalanced and balanced inputs. Auto Standby feature, adjustable between 5 – 240 minutes in increments of 5 minutes
- Digital Volume Level: -11 to +11 dB in 1 dB increments, via the control panel. -80 to +20 in 1 dB increments, via SubConnect application
- IR Remote Control Code: Supplied IR remote. Front facing IR receiver with red LED indication
- SubConnect (PC Application): Windows (7 onwards) (32/64 bit) compatible setup application available from the Monitor Audio website. Allows the user to control advanced subwoofer setup features. Settings can be saved while not connected to the subwoofer for off-site setup
- Audio Input/Outputs: LFE balanced input (XLR), LFE unbalanced input (RCA), stereo unbalanced inputs (RCA). LFE balanced output (XLR), LFE unbalanced output (RCA), stereo unbalanced outputs (link RCA)
- Connection: 12 V Trigger in (3.5 mm mono mini-jack, 6 V threshold), assignable to On/Off or Pre-set change, 3.5 mm Microphone input jack (mic supplied), RJ45 connector supporting RS232 (EIA/TIA - 561, Tx Pin 6, Rx Pin 5, Gnd Pin 4), IR repeater – Output (3.5 mm mono mini-jack), USB – Type B, for connecting to SubConnect PC application and Firmware update
- Electrical Certifications: CE / CB/ ETL / Fcc / CCC/ ErP (Energy saving compliant)
- Mains Input Voltage: 100 – 120 Vac ~60Hz / 220 – 240 Vac ~50/60 Hz (Manually selected)
- Power Consumption: Maximum 600 W, Standby <0.5 W (ErP compliance)
- Fuse Type: 20 mm T8AL 250 VAC
- Weight (unpacked): 26.98 kg (59 lb 8.3 oz)
- External Dimensions (Including Amp, Drivers and Terminals (H x W x D)): 413 x 410 x 433.5 mm
- External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D)): 445 x 410 x 433.5 mm
- Sold As: Single Unit
- Warranty: 1 year
What Is In The Box
- Monitor Audio Gold W12 12-Inch Subwoofer - Black
Videos
No Videos Available
Manufacture Description
Not Available
Write Your Own Review