BHD
JOD
KWD
LBP
QAR
SAR
USD
AED
ADAM Audio Sub10 Mk2 10 inch Active Studio Subwoofer
he Sub10 MK2 from Adam Audio is an ideal choice to fill out the low end of any stereo or 5.1 surround monitoring system. It has a 10-inch cone and is powered by a 200W RMS (300W peak) amplifier. It offers both XLR and RCA I/O connectors for integration with just about any system. The bandwidth of the Sub10 MK2 and the connected speakers may be adjusted separately, allowing it to be used with many different satellites.
Features:
- Linear bass reproduction down to 25Hz
- Maximum Peak sound pressure in 1 m ≥ 113dB
- High-efficiency 200W PWM amplifier
- Special 10" woofer with paper diaphragm
- Easy manual or automatic (de-)activation
- Upper cutoff frequency is selectable between 50Hz and 150Hz
- Switchable highpass filter for satellite outputs, rolls off signal below 85Hz
- Analog XLR and RCA inputs
Recommended Products
Delivered within 3-5 working days
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
SUBWOOFER:
- Number: 1
- Basket Ø: 10" (260 mm)
- Voice Coil Ø: 2" (50 mm)
- Cone Material: Paper
- BUILT-IN AMPLIFIERS:
- Subwoofer: 1
- Type: PWM
- Amp. Power RMS / Music: 200 W / 300 W
INPUT CONNECTORS:
- Analog: XLR / RCA
GENERAL DATA:
- Frequency Response: 25 Hz - 150 Hz
- THD > 60 Hz: ≤1 %
- Max. peak SPL at 1 m: ≥113 dB
- Crossover Frequencies: 50 - 150 Hz
- Input Impedance: 10 kOhm
- Panel: Rear
- Weight: 46.3 lb (21 kg)
- Height x Width x Depth: 22" (560 mm) x 12" (300 mm) x 15.5" (400 mm)
WARRANTY: 1 year
What Is In The Box
- ADAM Audio Sub10 Mk2 10 inch Powered Studio Subwoofer
- 4 x Protection Rubber Foot Plugs
- Power Cord
Videos
Manufacture Description
ADAM AUDIO SUB10 MK2
The Sub10 MK2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz.
A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.
The Sub10 MK2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).