BHD
JOD
KWD
LBP
OMR
QAR
SAR
USD
Atlas Equator Achromatic 2 RCA to 2 RCA Audio Cable Pair - 1m
Atlas only uses the purest quality copper in its products with the Equator Achromatic being no exception. Utilising Atlas’ Ohno Continuous Cast (OCC) 5N (99.999% pure – the highest purity available) copper technology, each strand is ‘pulled’ from a single copper crystal, enabling electrical signals to flow with the least deletions. A coax design, Equator Achromatic uses 60 stands of OCC copper to create its signal conductor, which is enclosed in gas-foamed PEF (Foamed Polyethylene), which delivers a more inert and consistent dielectric. The Equator Achromatic is fitted with Atlas’ proprietary Achromatic RCA plugs. The low mass Integra connector features a solder-free, cold-weld connection, optimised to create a coherent, continuous signal path. Each Achromatic plug features gold-plated conjugate brackets, which spring open on insertion and wipe clean the signal path. To maintain a clean signal path, simply remove and re-insert them periodically.
Features:
- Achromatic RCA Plugs
- OCC Conductors
- PEF Dielectric
- Co-ax Construction
Recommended Products
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
- Construction : Co-ax (Double Screened)
- Material :OcC
- Dielectric : PEF (foamed PE)
- Screen : OFC, 95% (double OFC braid)
- Capacitance : 53.27 pF/m
- Inductance : 0.40 µH/m
- Resistance : 0.027 Ohms/m
- Impedance : 78.25 Ohms at (1MHz)
- Outside Diameter : 8.5mm
What Is In The Box
- Atlas Equator Achromatic 2 RCA to 2 RCA Audio Cable Pair
Videos
Manufacture Description
Achromatic Plugs
Atlas’s expert electro-mechanical knowledge has led to the innovation of the next generation of RCA plugs. Known as the ‘Atlas Achromatic RCA plug’, Atlas has focused on improving both performance and appearance to create a higher performance starting point for their RCA cables as well as eliminating variability in performance. This has been achieved by refocusing on materials and the assembly processes.
Atlas has made 4 key changes with the Achromatic RCA plug. Firstly, the barrel of the Achromatic plug features a high stability ABS material. This is strong, stable and of superlative surface quality.
There is also an improvement to the Achromatic plug’s contact geometry, aiding the contact properties of the plug and the self-cleaning wiping action to ensure contacts are in optimal condition and to maximise signal transmission.
The third change Atlas made was around the rifling of the RCA pin. This improvement self-aligns the conductors during the cold weld processing, ensuring a superior stable connection.
Finally, there is a reduction in the overall mass of the RCA plug by 8% which has shown to improve signal transmission.
The above changes mean a solder-free, low mass, self-cleaning, recyclable RCA plug with a non-conductive body.
OCC Copper
The Ohno continuous casting method re-heats the extrusion as the molten copper is forced out of the mould and very slowly and gradually draws the grain or crystal down the conductor''s length, creating a ‘single crystal structure.’ Actually, because no copper is 100% pure, there will always be a few boundaries produced by impurities. The frequency of boundaries created are quite insignificant. A typical crystal in a copper conductor drawn to 0.3 mm diam. using the OCC process is 125.00 metres long! The benefits are obvious, with almost no crystal boundaries, the audio signal is no longer impeded down the copper wire and more information and detail is delivered faithfully to the receiving equipment.