Pay online for contactless deliveries.

sE Electronics DM1 Dynamite Active Microphone Preamplifier - Black

Samma3a Rating:
AED394.80

The DM1 Dynamite Active Inline Microphone Preamplifier from sE Electronics is an active inline preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier (sold separately). It can be used to deliver a robust 28 dB of gain to boost the audio signal of a passive mic, which improves the level to a preamplifier without adding noise or coloration.

Features:

  • Requires passive microphone (ribbon/dynamic) and 48V phantom power
  • Not for use with phantom-powered microphones (condenser microphones, active ribbon mics)
  • Provides 28dB of clean, consistent gain
  • Designed for neutral, balanced sound quality
  • The perfect way to boost the signal of a passive microphone
  • Gain stays consistent regardless of connected load
  • Provides significantly improved level to your mic preamp for proper gain staging
  • State-of-the-art Class A electronics and high-grade FETs provide supremely class-leading low noise
  • Transformerless design for pristine sound quality
  • Dedicated output buffer amplifier provides 28dB output, independent of load impedance or cable length
  • Extremely low output impedance drives long cable runs and reduces susceptibility to RF interference, buzz, and hum
  • Gold-plated XLR connector for loss-free and reliable signal connection
  • Slim, roadworthy all-metal housing with premium finish provides efficient rejection of electrical interference and noise
  • High-quality finish ensures a great look for many years
  • Slim design allows for easy deployment onstage or in the studio
Read More

Customer Also Viewed

Samma3a Review

Not Available

Technical Specification

  • Type: Inline Mic Preamp
  • Channels: 1
  • Inputs: 1 x XLR
  • Outputs: 1 x XLR
  • Power Supply: 48V phantom power
  • Height: 3.76"
  • Width: 0.75"
  • Weight: 0.17 lbs.

What Is In The Box

  • sE Electronics DM1 Dynamite Active Microphone Preamplifier - Black

Videos

No Videos Available

Manufacture Description

The DM1 DYNAMITE: explosive level for all your passive mics.

Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your passive microphones.

\n","url":"https://youtu.be/W-unJ9K5fwM","width":854,"height":480,"providerName":"YouTube","thumbnailUrl":"https://i.ytimg.com/vi/W-unJ9K5fwM/hqdefault.jpg","resolvedBy":"youtube"}" data-block-type="32">

" data-provider-name="YouTube">
With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent 28dB regardless of the connected load, thanks to its dedicated buffer amplifier.
dm1-in_use8-med.jpg

The DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.

For optimum results, we recommend you plug the DM1 directly into your microphone’s output. If necessary, a cable can be used between the microphone and the DM1 - but the shorter the cable, the better the overall performance will be.

Write Your Own Review
You're reviewing:sE Electronics DM1 Dynamite Active Microphone Preamplifier - Black
Your Rating