BHD
JOD
KWD
LBP
OMR
QAR
SAR
USD
Emotiva Audio XPA Multi Channels audio amplifier
- Class a/B output stage, with dual differential inputs, a short high current signal path, all discrete components, and our optimized Class H power supply topology.
- 275 watts RMS per Channel, all channels Driven, into 8 ohms. 300 watts RMS per Channel, two channels Driven, into 8 ohms.
- Fully modular construction allows you to add more channels later as you need them (up to seven channels total)
- Balanced and unbalanced inputs, audiophile grade gold-plated five way binding post speaker terminals, and audiophile-grade fault protection.
- Massive switch mode power supply with high efficiency and excellent Regulation.
Recommended Products
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
- Type: Powered amp
- Power OutputALL MODELS: Power Output Per Channel 300 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms / 550 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.2%; into 4 Ohms / 800 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.5%; into 2 Ohms
- ALL MODELS: FTC Rated Power; 2 Channels Driven; 20 Hz – 20 kHz; THD <0.1% 300 watts RMS per channel; THD < 0.1%; into 8 Ohms (120 VAC line). /490 watts RMS per channel; THD < 0.1%; into 4 Ohms (120 VAC line).
- XPA Gen3 Power Per Channel: All Channels Driven; THD <0.1% ; into 8 ohms: 300 watts RMS per channel
- Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).
- Broad Band Frequency Response: 5 Hz to 80 kHz (+ 0 / – 0.15 dB).
- THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms
- Signal to Noise Ratio (8 Ohm load): > 117 dB; ref FTC rated power; unbalanced input (A-weighted). /> 91 dB; ref 1 watt; unbalanced input (A-weighted).
- Minimum Recommended Load Impedance: 4 Ohms; which equals one 4 Ohm load or two paralleled 8 Ohm loads.
- Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts.
- Power Supply: High efficiency, audiophile grade, Switch Mode Power Supply (SMPS).
- Input Sensitivity (for rated power; 8Ohm load): 1.5 V.
- Gain: 29 dB.
- Input Connections: Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable.
- Input Impedance: 33 kohms (balanced). /23.5 kohms (unbalanced).
- Power Requirements: Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).
- Dimensions:: 17” wide x 8” high x 19” deep (unboxed; including feet).
- Weight:
-
XPA two Gen3: 35.5 lbs (unboxed) XPA three Gen3: 39 lbs (unboxed) XPA four Gen3: 42.5 lbs (unboxed) XPA five Gen3: 46 lbs (unboxed) XPA six Gen3: 49.5 lbs (unboxed) XPA seven Gen3: 53 lbs (unboxed)
What Is In The Box
Videos
Manufacture Description
Real Power. Really.
You can’t even begin to compare the power capabilities of most existing AV receivers to the massive power capacity of our new XPA Series amplifiers. Even many “high-end” power amplifiers are rated with only a single channel, or sometimes with just two channels driven. Seriously, we can’t make this stuff up. Maybe they come up with up with some marketing-driven “burst” power standard that exaggerates their performance. Or their marketing guys say hey, “instead of using an 8-ohm rating, let’s do it at 6 ohms; that’ll make a bigger power number!” Genius? Nope.
Emotiva XPA Series amplifiers are always rated with all channels driven –continuously – into 8 ohms. Period. (We do give you some of those other ratings as well, so you can compare our performance to that of our “competitors” on their terms.) Just ask many of our competitors to see their “all channels driven” power ratings and watch the dance begin… what should that tell you?
The bottom line is that our new XPA Gen3 amplifiers will deliver the full power and majesty of today’s high definition movie and music sources without a hint of strain, loss of detail, or control. We’re talking about real-world power and fidelity that you can immediately hear and appreciate. No excuses, no compromises, and no double-talk.
The Heart of Your System
Our new XPA Gen3 amplifiers aren’t just about power and impact. Behind the massive power supplies are audiophile-grade amplifier modules, built using premium components. We use the finest materials and the latest technologies to bring you world-class products. They are carefully engineered and designed to work together as stunningly capable, reliable, and refined systems. We listened both to you, and our gear, and we like what we hear.
Best of all, when it’s time to upgrade or your needs change, the XPA Series Modular Amplifier System is easily reconfigured to meet you needs. What? No planned obsolescence?
Heresy. That’s what some will say. We say, sit back and have a listen.
Are you starting to see a trend?
Here’s another:
Designed, Assembled, and Tested in the U.S.A.
Features
- True audiophile-quality sound – as with all of our amplifiers, the XPA Gen3 modular power amplifier was designed first and foremost to sound superb in all types of audio systems.
- Amazing sounding wideband, low distortion amplifier design – ensures smooth, detailed sound and incredibly natural imaging – without a trace of harshness or strain.
- Optimized Soft-Switch Class H™ power supply topology – delivers improved efficiency without compromising audio performance.
- Switched Mode Power Supply (SMPS) – offers all of the performance of a traditional linear power supply, while improving efficiency and reliability, and reducing overall weight.
- Fully modular construction – allows you to purchase as many channels as you need today, and then add more channels later when and if you need them.
- Top quality parts and construction throughout – promise years of reliable service.
- Totally stable – designed for use in the real world, with real speakers.
- Heavy steel 4RU chassis with milled aluminum faceplate – provide strength and rugged good looks.
- Gold plated five-way speaker binding posts with clear shields – allow you to use a wide range of speaker cables with bare wires, lugs, or banana plugs.
- Solid machined gold-plated RCA input connectors – provide a reliable connection with a wide variety of audio interconnects.
- Choice of balanced or unbalanced inputs – independently controlled by high-reliability metal toggle switches to ensure long service life.
- Remote trigger input and output – allows the XPA Gen3 to be turned on by trigger-enabled equipment, and to activate other trigger-enabled equipment.
- Audiophile-grade fault protection – entirely transparent under normal conditions, yet protects the amp and your other equipment from all common fault conditions.
- World compliant AC line voltage operation – the XPA Gen3 operates on any line voltage between 100 VAC and 250 VAC 50/60Hz and is protected from faults by a rugged resettable circuit breaker.
- Standard IEC power inlet