BHD
JOD
KWD
LBP
OMR
QAR
SAR
USD
Sennheiser XSW-D LAVALIER SET Digital Wireless Omni Lavalier Microphone System
The Sennheiser XSW-D LAVALIER SET is an easy entry point into the world of wireless microphone audio for speakers, educators, panelists, and moderators looking for a stage-ready system that's both cost effective and simple to use. It puts world-renowned Sennheiser wireless sound quality in a miniaturized, plug-and-go, 1-button digital system that anyone can operate. Plug it in, power it up, and you're immediately up and running, streamlining your setup so you can concentrate on delivering your message to your audience with confidence.
Features:
- One touch ease-of-use
- 2.4 GHz digital transmission for worldwide operation
- 75m range (250ft) in optimal conditions
- Up to 5 hours battery life on a single charge
- Switch between multiple transmitters linked to one receiver
- Configure any combination of transmitters and receivers
- Mute from either transmitter or receiver
Recommended Products
Prepaid Product
Customer Also Viewed
Samma3a Review
Technical Specification
- Dimensions:
- XSW-D XLR FEMALE TX: approx. 102 x 24 x 28 mm
- XSW-D MINI JACK TX: approx. 86 x 24 x 28 mm
- XSW-D INSTRUMENT TX: approx. 122 x 24 x 28 mm
- XSW-D XLR MALE RX: approx. 109 x 24 x 28 mm
- XSW-D MINI JACK RX: approx. 86 x 24 x 28 mm
- XSW-D INSTRUMENT RX: approx. 122 x 24 x 28 mm
- XSW-D PEDALBOARD RX: approx. 130 x 82 x 51 mm
- THD, total harmonic distortion: < 0.1 %
- Charging time: typ. 3 h
- Audio output: max. 12 dBu
- Operating temperature: -10 °C to +55 °C (14 °F to 131 °F)
- Signal-to-noise ratio: ≥ 106 dB
- Operating time: up to 5 h
- Modulation: GFSK with TDMA
- Battery Specification: Li-Ion
- Capacity: 850 mAh
- Codecs: aptX® Live
- Frequency range: 2,400 - 2,483.5MHz
- Max. Input voltage: typ. 5.0 V
- Transmission power: max. 10 mW
- Voltage: 3.7 V
- Operating relative humidity: 95 % (non-condensing)
- Latency: < 4 ms
- Temperature Range: 0 °C - 60 °C (32 °F - 140 °F)
- Audio frequency response:
- 3.5 mm Jack/XLR: 80 - 18,000 Hz
- 6.3 mm Jack: 10 - 18,000 Hz
- Warranty: 1 year
What Is In The Box
- ME2-II clip-on lavalier mic
- XSW-D 3.5mm (1/8") transmitter
- XSW-D XLR male receiver
- Belt clip
- USB-A to USB-C charging cable
Videos
Manufacture Description
Lose the cables, keep the connection
Essentially a cable replacement, XS Wireless Digital uses a 2.4 GHz transmission to create a wireless peer-to-peer connection. Simply plug the included ME 2-ii lavalier into the transmitter and plug the receiver into your mixer or active PA speaker. As soon as you see the green light, you’re good to go. For presenters and public speakers alike, there is no easier way to captivate your audience while having the ability to roam free.
As easy as it gets
Each XS Wireless Digital transmitter and receiver have only one button. Press to power up and link simultaneously, click once to mute, and hold to power down. What’s more, they each feature a single LED that indicates when your connection is secure or when it’s time to charge the battery. There are no menus to fuss with or settings to worry about. It’s almost as easy as plugging in a cable, minus the cable part.
Digital for worldwide operation
XS Wireless Digital uses the same 2.4 GHz frequency as WiFi allowing for license free operation worldwide. There is no need to scan for available frequencies as the system automatically does it for you. This means you can take XSW-D with you wherever you go without fear of static interference or dropouts. Just turn it on and start your presentation.